Maxitrol has been manufacturing SENTRY GT© (patented technology) thermal cut-off devices (TCOs) for almost 30 years; and over this period, we have seen their popularity continue to grow.
By working closely with our colleagues in the gas industry, we are better able to understand their daily operational challenges. We also take onboard essential feedback and look for new ways to innovate our products.
Historically when TCOs are utilised for gas meter protection, they are installed upstream of the gas meter emergency control valve (ECV). Whilst this location is ideal, it is not entirely possible all of the time. The limiting factor in fitting the TCO upstream of the ECV is the dependency on an upstream additional isolation valve, which is used to shut off the supply whilst the work is being carried out. It is of course, common place to be able to locate such a valve on more recent installations. However, some older installations can be more challenging. Furthermore, the isolation of these valves can, in some instances, interrupt the supply of gas to several properties, which is far from ideal.
After considering the information and consulting with our colleagues in the gas industry, we developed our new Legacy GT©. The GT20BLC0, is the first thermal cut-off device which can be screwed directly onto the outlet of a meter emergency control valve. Thus it allows competent gas operatives the ability to provide additional protection to a meter installation without disrupting the gas supply to neighbouring properties, as the work can be localised. When used as part of a thorough risk assessment the Legacy GT© can provide additional protection to gas meter installations in the event of fire. And where guidance allows, can be considered a viable alternative to fire-resistant meter boxes.
The Legacy GT© provides gas operatives with yet another solution to the many challenges of which they face on a daily basis. It is easy to install, reduces operational down time and when used as an alternative to fire resistant meter boxes, it can also offer considerable cost savings.
Also available in combination with a SENTRY GS excess flow valve (EFV).
Read more about the SENTRY GT© Thermal Cut-off Devices in Europe.
|Sentry GT Thermal Cut-off Devices & Ball Valves|
Thermally activated cut-off devices and ball valves.
|Sentry GS Excess Flow Valves; Sentry GT Thermal Cut-off Devices|
Thermal cut-off devices for legacy installations & excess flow valves for the UK.
|🇬🇧 UK, GSH.GT-LT-EN-01.2020-UK||DownloadPreview|